Brief
HOWO Garbage Compactor is a split-body rear loader that is the ideal garbage truck for manually collecting multiple commodities on a single route. The curved refuse body and the bottom plate are welded seamlessly, which eliminates the risk of leakage. High-strength manganese steel plate is used, and all reinforcements of the body shall be in the form of “U” shaped braces and full-seam welded on the body sheets, of thickness of 4-6 mm.
HOWO Garbage Compactor combines durability and functionality with long lifespan and and maximum performance. The split two-compartment body features independent hydraulic systems enabling the pressure to be adjusted for each compartment independently based on the type of refuse that has been collected.
features
Body Unit Only without ChassisMaximize Compression Ratio
-9 oil cylinders all thickened, high quality and good performance.
-Equipped with a double pump for 8CBM and above, stability is improved by 50%, and the pressure is 35% higher than that of competing products.
-CustomizeD the 3+2 split manifold valve to continuously reduce the probability of blockage. The pressure resistance is far greater than the maximum pressure generated by the oil pump.
-4-layer steel wire oil pipe, and the competing products are generally double-layer.
-Newly designed reduced weight body, increased payload and more route productivity
Optional Garbage Bin Tipper
Optional rear-mounted garbage bin tippers, on-ground spacious lifter, skip lifter, cart tipper, and shovel loader etc.
Auto Lock Hydraulic Tail Gate Latches
Hydraulic locking by means of reverse action of two hydraulic tailgate lifting cylinders also prevents the leakage of the wastewater when the truck bounces due to road conditions.
Safety Props
The tailgate is provided with safety props between the body and tailgate for safety purposes during maintenance or cleaning.
The truck and the unit system are furnished with all necessary controls & gauges. / Safety devices for improved efficiency and easy -safe operation, / Orange rotating beacon light on top.
Control System
The system is controlled from the PLC control box, which enables, start, stop, 1-cycle, continuous cycles, and rescue activities. Tailgate and ejector controls are in front of the body. All devices for loading control are mounted on the tailgate right side, and all are manual control for safety purposes. Compaction is controlled electrically via pushbuttons, and manually in case. There is an emergency stop button on each of side the truck on the control panel.
Compactor Type | Rear Compactor |
Capacity | 6 m3 |
Rear Hopper Capacity | 1 m3 |
Compression Cycle Time | 15-20sec |
Discharge Time | 15sec |
Hopper Opening | 63.5o |
Container Opening | 45o |
Average Compression | 0.6~0.8T/m3 |
Tare Weight | 2980 Kg |
Body Length | 4884mm |
Garbage Container Length | 3664mm |
Container Width | 1949mm |
Tailgate Width | 1890mm |
Tailgate Height | 2133mm |
Wheelbase | 3360mm |
CONTAINER BOX MATERIAL / model & thickness | |
Floor of the container | Q235/5mm |
Rear Ramp /Skirt | Q235/5mm |
Tailgate Cover Skirt | Q235/4mm |
Sider–Rear | Q235/4mm |
Sider–Front | Q235/4mm |
Ceiling | Q235/4mm |
Ejector Shied Rail | Q235/Profile /8mm |
Chassis Sub-frame | “U” shape full length 8mm |
Side Bar | Carbon steel profile |
HOPPER SYSTEM | |
Rear Cover Type | round |
Hopper | Q235/5mm |
Bottom Side | Q235/5mm |
Upper Side | Q235/5mm |
Conveyor Plate Rail | Q345/6mm |
Conveyor Plate | Q235/5mm |
Plate Compactor | Q235/5mm |
Joint Pins | 42CrMo |
Compactor Plate Shoes | Coated with HUMW |
Locking Cover | Manual screw |
Gasket | Anti corruption material |
Sewage Tank | 200Liters |
HYDRAULIC SYSTEM | |
Engine Acceleration System | Pressure switch |
Front Hydraulic Control | Through valve |
Rear Hydraulic | 90*45*610mm/16Mpa |
Hydraulic Pump | Gear pump |
Sequence Valves | Operate lifting device manual |
Conveyor Cylinders | 80*35*219mm/16Mpa |
Compactor Cylinders | 75*45*406mm/16Mpa |
Telescopic Cylinders | 115*100*2540mm/16Mpa |
Rear Hopper Cylinders | 70*40*610mm/16Mpa |
Hydraulic Hose | High pressure 3000psi7 |
Hydro Oil Tank | 120Liters |
Filters | By grade |
Hydro Pressure Pipes | Seamless steel |
ELECTRICAL SYSTEM | |
Rear Lights | LED Chassis Original |
Top Rear Lamps | LED plastic |
Bottom Rear Lights | Chassis Original, LED |
Alarm | Optional |
PAINTING | |
Pre-dealing | Polishing oil cleaning |
Primer | Anti corruption painting |
Finishing | PU ,paint twice |
Reviews
There are no reviews yet.