features
-The key components of the ISUZU Vacuum Sweeper are all produced by well-known brands, with long service life and reliable functions, ensuring product quality.
-Adopts two brooms in the middle, double suction pipes in the middle with ultra-wide suction cups, and a V-shaped high-pressure flushing rack with anti-collision and obstacle avoidance functions, which are combined to form a washing and cleaning belt larger than 3.5 meters.
-The structure of the whole vehicle is reasonable, and it is equipped with a large-capacity clean water tank. The vehicle can be used as a road sweeper alone for road sweeping and suction operations; it can also be used as a high-pressure washing vehicle for road washing and suction operations; The combination of sweeping suction and high-pressure flushing is used as a sweeper to realize the selection of various combinations of sweeping, flushing and pumping.
-In order to prevent forgetting to put down the safety frame and operating the lowering box, causing damage to the box and the frame, a proximity switch is specially provided; the car is equipped with an air-cooled hydraulic oil cooler, and the cooling is controlled by a temperature control switch When the temperature of the hydraulic oil reaches the set temperature, the cooler starts to cool; the box is lifted by a hydraulic double-cylinder, so that the box is lifted more smoothly, and in order to prevent the box from lifting In order to avoid the safety hazard caused by the failure of the pipeline, the lifting cylinder is equipped with a special hydraulic locking device.
specification
Engine |
ISUZU/4KH1CN5LS |
Transmission |
ISUZU/MSB |
Diesel |
5F+1R |
||
Inline 4-cylinder |
Manual |
||
98HP |
|
||
|
|||
2.999 L |
|
||
|
|||
Euro 5 |
|
||
Cabin |
1driver+2passengers |
Wheelbase |
3360mm |
|
YES |
|
|
Debris Hopper |
Capacity: 5m³ stainless steel (4m³ garbage+1,000L water) |
Sweeping Equipment |
Type: Four disc typed brooms equipped between front and rear axle , symmetric in right and left side of the truck drive by gerotor motors. |
Material: Stainless steel tank |
Sweeping disc diameters: Φ800mm |
||
Sweeping disc speed: High speed: 110r/min Medium ; 80 r/min low: 60 r/min |
|||
Sweeping disc tilt angle: Front tilt 4°~6° right and left tilt 2°~4° 6°~10° |
|||
Suction Equipment |
Full-floating suction nozzle that can automatically level with the road, spring floating suspension and road follow, large width suction nozzle, independent forward operation, hydraulic raise & lower 200mm diameter suction port, cleaning width greater than 3.2m.. |
Auxiliary Engine |
Type: High pressure , centrifugal ,sweeping truck specific used blower |
Hydraulic System |
Type: Open type, hydraulic control |
Reviews
There are no reviews yet.